■  FEATURES
I/O port designs for Panasonic FP2/FPE PLC.
Corresponding to wiring terminal blocks S011.
Corresponding to conversion module S063, can realize a comprehensive connection between PLC and signal terminal, then minimize the probability to connect cables in wrong way.

■  Cable Specifications

Gauger Specifications	AWG28
Wire Constitute	7/0.12MM²
Conductor material	软铜线
Insulation Material	PE
Twist and polishing	填允：棉线；包带；纸带
lolation	无
Appearance condition coating	PVC
Conductor impedance（ 20°C ）	239Ω/Kn 以下
Withstanding Voltage	AC500V/min
Insulation resistance	500MΩ/Kn 以上

■  Dimensions

Model		Cable specification	Dimensions	CN1		CN2		Lenght(mm)
L117-1		AWG 28		40P/MIL		40P/MIL		500～1000～1500 NOTES:the minimum cable is 500mm,and 500mm for increasing if need.
L117-2		AWG 28		40P/MIL		40P/MIL

·On the drawing, CN1 refers to PLC, CN2 refers to terminal Woa 
·Tolerance of overall length is ±30mm

■  Holes arrangement table

Model		Corresponding to CN1						Corresponding to CN2
		Brand			Module			Corresponding Terminal Blocks*¹
L117-1		panasonic(FpO.FpƩ series)			FP2-C1D(IN）			S011  S063
					FP2-X32D2
					FP2-Y64D2
					FP2-XY64DT/XY64D7T(IN)
					FPG-XY64D2T(IN)
L117-2		panasonic(FpO.FpƩ series)			FP2-C1D(OUT)			S009  S063
					FP2-Y32T
					FP2-Y64T
					FP2-XY64DT/XY64D7T(OUT)
					FPG-XY64D2T(OUT)

*1 All ihe products mentioned on the table are owned by Company, and please refer to the comprehensive catalogue for the relative specifications of S series products.

■  Wiring Diagram 


■  Holes arrangement table

Please note:
The right arrangement table is the order standard of DLE, and different companies have different hole orders, please check it before use