■  FEATURES
I/O port designs for Yokogawa FA-M3 series.
40bit port will be divided into two group ports of 20P signal.
Corresponding to wiring terminal blocks S010.
Corresponding to conversion module S060, can realize a comprehensive connection between PLC and signal terminal, then minimize the probability to connect cables in wrong way.

■  Cable Specifications

Gauger Specifications	AWG28
Wire Constitute	7/0.12MM²
Conductor material	软铜线
Insulation Material	PE
Twist and polishing	填允：棉线；包带；纸带
lolation	无
Appearance condition coating	PVC
Conductor impedance（ 20°C ）	239Ω/Kn 以下
Withstanding Voltage	AC500V/min
Insulation resistance	500MΩ/Kn 以上

■  Dimensions

Model		Cable specification	Dimensions	CN1		CN2		Lenght(mm)
L119-3		AWG 28		40P/FCN		CN2A	20P/MIL	500～1000～1500 注明：最短线长为500mm，如需增加以500mm为单位递增。
						CN2B	20P/MIL

·On the drawing, CN1 refers to PLC, CN2 refers to terminal Woa 
·Tolerance of overall length is ±30mm

■  Holes arrangement table

Model		Corresponding to CN1						Corresponding to CN2
		Brand			Module			Corresponding Terminal Blocks*¹
L119-3		Yokogawa(FA-M3 series)			F3WD32-3NF			S010  S060

*1 All ihe products mentioned on the table are owned by Company, and please refer to the comprehensive catalogue for the relative specifications of S series products.

■  Wiring Diagram 


■  Holes arrangement table

Please note:
The right arrangement table is the order standard of DLE, and different companies have different hole orders, please check it before use