■  FEATURES
I/O port designs for NX series.
Corresponding to wiring terminal blocks S010, S011
Corresponding to conversion module S060, S063,can realize a comprehensive connection between PLC and signal terminal, then minimize the probability to connect cables in wrong way.

■  Cable Specifications

Gauger Specifications	AWG28
Wire Constitute	7/0.12MM²
Conductor material	软铜线
Insulation Material	PE
Twist and polishing	填允：棉线；包带；纸带
lolation	无
Appearance condition coating	PVC
Conductor impedance（ 20°C ）	239Ω/Kn 以下
Withstanding Voltage	AC500V/min
Insulation resistance	500MΩ/Kn 以上

■  Dimensions

Model		Cable specification	Dimensions	CN1		CN2		Lenght(mm)
L11C-1		AWG 28		40P/MIL		20P/MIL		500～1000～1500 NOTES:the minimum cable is 500mm,and 500mm for increasing if need.
L11C-2		AWG 28		20P/MIL		20P/MIL

·On the drawing, CN1 refers to PLC, CN2 refers to terminal Woa 
·Tolerance of overall length is ±30mm

■  Holes arrangement table

Model		Corresponding to CN1*¹			Corresponding to CN2
		Brand			Module			Corresponding Terminal Blocks¹
L11C-1		MODICOM			BMXDDI3202K/6402K  BMXDDNB202K  BMXDDO3203K/6402K			S011  S063  SR32-PA1A-24  SE32-24    Q743
L11C-2		PREMIUM			DSY32T2K  DSY64T2K  TSXDSY64T2K  TSXDSY32T2K TSXDEY32D2K  TSXDEY16FK  TSXDEY64D2K  TSXDEY32D3K			S010  S060  SR16-PA1A-24  SE16-24   Q843

*1 All ihe products mentioned on the table are owned by Company, and please refer to the comprehensive catalogue for the relative specifications of S series products.

■  Wiring Diagram 


■  Holes arrangement table

Please note:
The right arrangement table is the order standard of DLE, and different companies have different hole orders, please check it before use